ID1 Series   |   S1 Series   |   S2 Series   |   C Series   |   SW Series

 

ID1 SERIES

4-WAY FLOOR-STANDING / TOWER SPEAKERS
Induction Dynamics’ ID1 Series comprises the ultimate in floor standing, full-range speakers. State of the art drivers, tightly controlled by patented electronics, pump rich sound from deep bass to crystal clear highs all from an elegant, hand-made 4-way cabinet. These elite, high-end tower speakers excel in stereo applications and as left/right mains, with or without an external subwoofer.

Aesthetics and acoustics combine in Induction Dynamics’ elegant in-wall speakers, providing audiophile-quality sound in a package that both audiophiles and interior designers will appreciate. The key to the compact wall-mounted enclosures lies with the patented S4X crossover. S4X’s revolutionary design involves inductive stacking of coils and reduces circuitry space requirements, which allows placement of a full-size crossover into a compact enclosure.

The wall-mounted loudspeakers mount easily and quickly in both new home construction and retrofit applications with Induction Dynamics’ patented Stud Grabber™ mounting system. Direct mounting to the wall studs provides greater balance and stability not found in typical bracket-to-drywall mounting, which can distort the drywall or shake loose over time.
HIGH & LOW SUBWOOFERS: The first thing you’re likely to notice about the floor standing ID1's is their unique subwoofer placement – utilizing a high and low subwoofer. Why this non-traditional approach? Even bass response. You’ll notice that as you walk around a room, bass response fluctuates widely - this is due to cancellations called room nodes. When subwoofers are coupled close together, they simply reinforce each others cancellations.

The floor standing ID1’s utilize spaced subwoofers to limit the effect of these room nodes. When one subwoofer experiences cancellations, the other doesn’t. This normalizes peaks and valleys, dispersing bass evenly throughout the entire room.

3-WAY / 4-WAY SWITCH: For extended bass response, reduced distortion, and greater sound pressure levels, the ID1 can be used with a dedicated subwoofer amplifier. Although many loudspeakers feature simple bi-amp pins for this purpose, the ID1’s go a step further. More >>

Pictured below: Custom sports car red ID1.15 tower speakers installed in the Beverly Hills home of Mel B. (aka: Scary Spice of The Spice Girls).
High End Tower Speakers 4-Way Floor Standing Audiophile Speaker

ID1 2013

4-Way Tower Speaker w/ Dual 10" Subwoofers

High End Tower Speakers 4-Way Floor Standing Speaker - Induction Dynamics ID1


Quick shipping available in black gloss.

Height: 45.25"
Width: 11"
Depth: 10.5"
Weight: 85 lbs / 41 kG.

The popular, floor standing ID1 incorporates dual 10" subwoofers plus a 3-way speaker design for compact space requirements. Switchable passive subwoofer crossover converts the ID1 to a 4-way speaker. Included accessories: chrome finished adjustable carpet spikes.
UpperLower
Crossover TypeS4X 4th OrderS4X 4th Order
Crossover Frequencies80, 700, 3,800 Hz80 Hz
Nominal Impedance8 Ohms4 Ohms
Frequency Response (Hz)60-22,000 Hz25-150 Hz
Sensitivity (2.83V @ 1M)89 dB89 dB
SPL (1W/1M) 89 dB86 dB
Power Handling (Watts)150 W800 W
Magnetic ShieldingYesNo
Tweeter1.125" Titanium inverted dome w/ phase control
Midrange3" Soft dome
Woofer6.5" Kevlar cone with rubber surround & cast frame
SubwooferDual 10" mica-graphite poly cone with cast frames and rubber surrounds
Binding PostsGold-plated #2 AWG wire
EnclosurePortedVented

ID1.iw

4-Way In-Wall Speaker w/ Dual 10" Subwoofers

High End In-Wall Speakers 4-Way Wall-Mount Stereo Speaker - Induction Dynamics ID1.iw


Height: 54.5"
Width: 13.5"
Depth: 4.5"
Weight: 56 lbs.

The ID1.iw combines dual 10" subwoofers with a 3-way loudspeaker to create a high-end, full range in-wall speaker for home theater. Use a home theater processor or receiver to provide the subwoofer crossover and to operate the ID1.iw as part of a surround system


UpperLower
Crossover TypeS4X 4th OrderS4X 4th Order
Crossover Frequencies (Hz)700 - 3,800 Hz70 - 80 Hz
Nominal Impedance8 Ohms4 Ohms
Frequency Response (Hz)55-22,000 Hz27-150 Hz
Sensitivity (2.83V @ 1M)90 dB80 dB
SPL (1W/1M) 90 dB77 dB
Power Handling (Watts)150 W500 W
Magnetic ShieldingNoYes
Tweeter1.125" Titanium inverted dome
Midrange3" Soft dome
Woofer6.5" Kevlar cone with rubber surround & cast frame
SubwooferDual low-profile 10" drivers with rubber surrounds
Binding PostsNickel-plated #8 AWG wire
EnclosurePortedSealed

ID1.w

4-Way On-Wall Speaker w/ Dual 10" Subwoofers.

High End Wall-Mount Speakers 4-Way Top Rated Stereo Speaker - Induction Dynamics ID1.w


Height: 54.5"
Width: 13.5"
Depth: 4"
Weight: 56 lbs.

The ID1.w combines dual 10" subwoofers with a 3-way loudspeaker to create a high-quality on-wall speaker for home theater. Use a home theater processor or receiver to provide the subwoofer crossover and to operate the ID1.iw as part of a surround system. Faceplate is removable so aluminum backplate can mount directly to wall. S4X™ circuitry compensates for on-wall baffle effects.

UpperLower
Crossover TypeS4X 4th OrderS4X 4th Order
Crossover Frequencies (Hz)700 - 3,800 Hz70 - 80 Hz
Nominal Impedance8 Ohms4 Ohms
Frequency Response (Hz)55-22,000 Hz27-150 Hz
Sensitivity (2.83V @ 1M)90 dB80 dB
SPL (1W/1M) 90 dB77 dB
Power Handling (Watts)150 W500 W
Magnetic ShieldingNoYes
Tweeter1.125" Titanium inverted dome
Midrange3" Soft dome
Woofer6.5" Kevlar cone with rubber surround & cast frame
SubwooferDual low-profile 10" drivers with rubber surrounds
Binding PostsNickel-plated #8 AWG wire
EnclosurePortedSealed

ID1.15

4-Way Tower Speaker w/ Dual 15" Subwoofers

High End Tower Speakers with Subwoofer 4-Way Stereo Speaker - Induction Dynamics ID1.15


Quick shipping available in black gloss.

Height: 62.75"
Width: 17.5"
Depth: 15.5"
Weight: 190 lbs.

Massive dual 15" subwoofers and an 8" mid-woofer in a high-power, 4-way floor standing speaker minimize floor space requirements for multiple subwoofers. A switch separates the subwoofers for use in home theater applications by switching out the internal 80 Hz crossover so that the two subs can be separately powered by a subwoofer amplifier. Comes with carpet spikes.
UpperLower
Crossover TypeS4X 4th OrderS4X 4th Order
Crossover Frequencies80, 500, 3,700 Hz80 Hz switchable internal
70-80 Hz recommended for external
Nominal Impedance4 Ohms4 Ohms
Frequency Response70-20,000 Hz21-150 Hz
Sensitivity (2.83V @ 1M)90 dB90 dB
SPL (1W/1M) 87 dB87 dB
Power Handling200 W1000 W
Magnetic ShieldingNoNo
Tweeter1.125" Titanium inverted dome
Midrange3" Soft dome
Woofer8" Kevlar cone with rubber surround & cast frame
SubwooferDual 15" talc-filled polypropylene cones with
cast frames and polyether surrounds
Binding PostsGold-plated #2 AWG wire
EnclosurePortedSealed

ID1.18

4-Way Tower Speaker w/ Dual 18" Subwoofers

High End Tower Speakers 4-Way Floor Standing Stereo Speaker with Subwoofers - Induction Dynamics ID1.18


Height: 65.75"
Width: 20.75"
Depth: 20.75" with grill included
Weight: 240 lbs / 109 kG.

The ID1.18 incorporates dual 18" subwoofers and twin 8" mid-woofers for extended power handling, sound pressure levels, and low-end response. High and low subwoofer design provides remarkably even bass throughout the room, without the need for external subwoofers. Included accessories: chrome-finished adjustable carpet spikes.
UpperLower
Crossover TypeS4X 4th OrderS4X 4th Order
Crossover Frequencies500 - 3,700 Hz80 Hz
Nominal Impedance4 Ohms4 Ohms
Frequency Response70-20,000 Hz19-150 Hz
Sensitivity (2.83V @ 1M)91 dB88 dB
SPL (1W/1M) 88 dB85 dB
Power Handling400 W1200 W
Magnetic ShieldingNoYes
Tweeter1.125" Titanium inverted dome w/ phase control
Midrange3" Soft dome
Woofer(2) 8" Kevlar cones with rubber surround & cast frame
SubwooferDual 18" laminated cones with
cast frames and coated foam surrounds
Binding PostsNickel-plated #8 AWG wire
EnclosurePortedSealed